Crosby Forged Steel Wire Rope Clips
CROSBY FORGED STEEL WIRE ROPE CLIPS-G450

Each base has a Product Identification Code (PIC) for material traceability, the name CROSBY or CG, and a size forged into it
Based on the catalogue breaking stength of wire rope, Crosby wire rope clips have an effiency rating of 80% for 3mm through 22mm sizes, and 90% for sizes 24mm through 90mm
Entire Clip is galvanized to resist corrosive and rusting action
Size 3mm through 62mm and 75mm have forged bases
All Clips are individually bagged with proper application instructions and warning information
Clip sizes up through 38mm have rolled threads
Meets or exceeds all requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements. Importantly, these wire rope clips meet other critical performance requirements including fatigue life, impact proporties and material traceability, not addressed by ASME B30.26
Look for the Red-U-Bolt®, your assurance of Genuine Crosby Clips
G-450(Red-U-Bolt) Warning
Failure to read, understand, and follow these instructions may cause death or serious injury
Read and understand these instructions before using clips
Match the same size clip to the same size wire rope
Prepare wire rope end termination only as instructed
Do not use with plastic coated wire rope
Apply first load to test the assembly. This load should be of equal or greater weight than loads expected in use. Next, check and re-tighten nuts to recommended torque (See table)