Crosby IP Vertical Lifting Clamps

Crosby IP Vertical Lifting Clamps

Shutterlock offers quality Crosby IP Clamps the are suitable for various applications.

This product has the following specifications :

Universal lifting in any direction
Vertical lifting, turning & transfer
Horizontal lifting
No damage to material
Transfer, lifting & stacking of steel beams
Lift, move & transfer 50-55 gallon drums with steel tops

 

Horizontal Plate Clamps

For Horizontal Lifting and Transfer

Available in capacities of .75 thru 25 metric tons.
Wide variety of jaw openings available: 0 to 120mm.
Welded alloy steel body for strength and smaller size. Forged alloy components, where required.
Equipped with handle for easy placement.
Individually Proof Tested to 2 times the Working Load Limit with certification.
Company name Crosby (IP), logo, Maximum & Minimum Working Load Limit and jaw opening permanently stamped on body.
Each product is individually serialized, with the serial number and Proof Load test date stamped on body. Serial number is included on the test certificate with maintenance and warranty logbook.
Maintenance replacement kits are available.
Manufactured by a ISO 9001 facility.
All sizes are RFID EQUIPPED

 

Vertical Plate Clamps

  For Vertical Lifting and Transfer

Available in capacities of .5 thru 30 metric ton (Higher Working Load Limits are available upon request.)
Wide variety of jaw openings available: 0 to 155mm.
Welded alloy steel body for strength and smaller size. Forged alloy components, where required.
Individually Proof Tested to 2 times the Working Load Limit with certification.
Company name Crosby (IP), logo, Maximum & Minimum Working Load Limit and jaw opening permanently stamped on body.
Each product is individually serialized, with the serial number and Proof Load test date stamped on body. Serial number is included on the test certificate with maintenance and warranty logbook.
Available in variety of styles:

IPU10 – Standard clamp for materials with a surface hardness to 37Rc (345HB).
IPU10J – Larger jaw opening.
IPU10S – For use on stainless steel material.
IPU10H – For use with materials with a surface hardness to 47Rc (450HB).

Full 180o turning range for material transfer, turning or moving.
Lock open, lock closed ability with latch for pretension on material and then release connection between the clamp and hoist hook.
Optional IP-5000 Stinger assembly available. Allows for easy connection between the clamp and hoist hook.
Minimum WLL of 10% of Maximum WLL.
Maintenance replacement kits are available.
Manufactured by a ISO 9001 facility.
All sizes are RFID EQUIPPED.

Vertical Plate Clamps

For use in almost all sectors of industry where during the lift or transfer, no damage to the material is permitted.

Available in capacities of .5, 1 and 2 metric tons.
Wide variety of jaw openings available: 0 to 38mm.
Welded alloy steel body for strength and smaller size. Forged alloy components, where required.
Individually Proof Tested to 2 times the Working Load Limit with certification.
Company name (CrosbyIP), logo, Working Load Limit and jaw opening permanently stamped on body.
Each product is individually serialized, with the serial number and Proof Load test date stamped on body. Serial number is included on the test certificate with maintenance and warranty logbook.
Full 180° turning range for material transfer, turning or moving.
Lock open, lock closed ability with latch for pretension on material and then release of material.
Optional IP-5000 Stinger assembly available (see page 420).
Allows for easy connection between the clamp and hoist hook.
Material must be clean and dry.
Maintenance replacement kits are available.
Manufactured by a ISO 9001 facility.
All sizes are RFID EQUIPPED.

 Horizontal Plate & Beam Clamps

The IPBHZ beam clamp is used for horizontal lifting and transfer of steel beams. The base is slotted to allow the clamps to be used from end of beams as well as from the flange. This series of clamps can be used in the vertical and horizontal moving, transfer and stacking of different types of structural designs, such as I-Beams, H-beams, angles,  etc., depending on the application desired.

The IPBKZ beam clamp is used for lifting, transfer and stacking of H-Beams.  An over-center hoist eye allows for the beam flange to remain vertical. This series of clamps can be used in the vertical and horizontal moving, transfer and stacking of different types of structural designs, such as H-Beams, angles, etc., depending on the application desired.

 

The IPVK drum clamp is for vertical lift and transfer. Automatically locks on drum, and can be used alone or in pairs.

The IPU10/A automatically click on to the material as soon as the clamp is placed on the plate.
The fact that the safety lock remains in position as the clamp closes precludes hazardous situations. Fastening the IPU10/A clamp in places that are difficult to reach is no problem.

 

© 2017 Shutterlock All rights reserved | Privacy Policy | Industrial Brands by Right Click Media