Catalogue
Lanyards
Search & Enquire
Browse our full range of lifting, rigging and safety equipment. Search by name or product code, filter by category, and send an enquiry — no account or payment needed.
24 products in Lanyards
← Back to categories
30mm Webbing Forked Lanyards – PN 361(30)
KARAM also provides a range of Forked Lanyards that can be used to move up or down, or along the sides while remaining connected at all times. Consists of Energy Absorber to reduce the impact of fall to less than 6kN. The Loops at the end are provided with an abrasion resistant covering. This prevents the webbing from getting damaged by the metallic contact of the connector. As these lanyards are made from a webbing, it prevents undue twisting, grime and dust. It is easy to clean and prevents water absorption. Features:- Material Made up of 30mm wide polyester webbing. Length Available in length 1.75 m Attachments Has Steel Snap Hook PN 124 at all the ends. Material:- Polyester Webbing Attachments:- Harness End: PN 124 Anchorage End: PN 124 Length 1.75 m Certified to:- EN 355:2002, VG 11/RfUCNB/P/11.063
View product →
30mm Webbing Forked Lanyards - PN361(30)N
KARAM also provides a range of Forked Lanyards that can be used to move up or down, or along the sides while remaining connected at all times. Consists of Energy Absorber to reduce the impact of fall to less than 6kN. The Loops at the end are provided with an abrasion resistant covering. This prevents the webbing from getting damaged by the metallic contact of the connector. As these lanyards are made from a webbing, it prevents undue twisting, grime and dust. It is easy to clean and prevents water absorption. Features:- Material Made up of 30mm wide polyester webbing. Length Available in length 1.75 m Attachments Has Steel Snap Hook PN 124 at one end and two Steel Scaffold Hook PN 131N at other ends. Material:- Polyester Webbing Attachments:- Harness End: PN 124 Anchorage End: PN 131N Length 1.75 m Certified to:- EN 355:2002, VG 11/RfUCNB/P/11.063
View product →
Energy Absorbing 30mm Webbing Lanyard Both Side Hook PN121– PN 325(30)
KARAM introduces Fall Arrest 30mm Webbing Lanyards made up of 30mm wide polyester webbing from high tenacity polyester yarn Consists of Energy Absorber to reduce the impact of fall to less than 6kN. The Loops at the end are provided with an abrasion resistant covering. This prevents the webbing from getting damaged by the metallic contact of the connector. As these lanyards are made from a webbing, it prevents undue twisting, grime and dust. It is easy to clean and prevents water absorption. Features:- Material Made up of 30mm wide polyester webbing from high tenacity polyester yarn. Length Available in length 1.75 m Attachments Has Steel Snap Hook PN 124 at both the ends. Material:- Polyester Webbing Attachments:- Harness End: PN 124 Anchorage End: PN 124 Length:-1.75 m Certified to:-EN 355:2002
View product →
Energy Absorbing 30mm Webbing Lanyard One Side Hook PN121 and Other Side Hook PN131N - PN 329(30)
KARAM introduces Fall Arrest 30mm Webbing Lanyards made up of 30mm wide polyester webbing from high tenacity polyester yarn Consists of Energy Absorber to reduce the impact of fall to less than 6kN. The Loops at the end are provided with an abrasion resistant covering. This prevents the webbing from getting damaged by the metallic contact of the connector. As these lanyards are made from a webbing, it prevents undue twisting, grime and dust. It is easy to clean and prevents water absorption. Features:- Material Made up of 30mm wide polyester webbing from high tenacity polyester yarn. Length Available in length 1.75 m Attachments Has Steel Snap Hook PN 124 at one end and Steel Scaffold Hook PN 131N at other end. Material:- Polyester Webbing Attachments:- Harness End: PN 124 Anchorage End: PN 131N Length:-1.75 m
View product →
Energy Absorbing Kernmantle Rope Lanyard One Side Hook PN121 and Other Side Hook PN131N
Key Features Made from high-quality kernmantle rope of dia 11mm They are cross-stitched and are protected with a strong transparent covering sleeve. This not only protects the ends, but also makes the stitches visible for easy inspection before use The loops at the end are protected by an abrasion resistant thimble. This prevents the rope from being damaged by the metallic contact of the connector The rope also has a coloured tracer strand (age indicator) which loses its colour in due course of time, indicating that the lanyard is now unfit for further use Available in length 1.0m, 1.5m, 1.8m, and 2.0m All KARAM lanyards are also supplied with any other hook on special request All lanyards with different combinations of connectors mentioned below are individually certified as per EN 355:2002 and IS 3521(part 2):2021 Certification: EN 355:2002 and IS 3521(Part 2):2021
View product →
Energy Absorbing Twisted Rope Lanyard One Side Hook PN121 and Other Side Hook PN131N
Key Features Made up of Polyamide twisted rope of 12mm dia The spliced end is protected with a strong transparent covering sleeve, which not only protects the splicing but also makes the splicing visible for easy inspection before use Loops at the end are protected by an abrasion resistant thimble, which prevents the rope from being damaged by the metallic contact of the connector The rope also has a coloured tracer strand (age indicator) which loses its colour in due course of time, to show that the lanyards is now unfit for further use Available in length 1.0m, 1.5m, 1.8m, and 2.0m All KARAM lanyards are also supplied with any other hook on special request All lanyards with different combinations of connectors mentioned below are individually certified as per EN 355:2002 and IS 3521(part 2):2021 Certification: EN 355:2002 and IS 3521(Part 2):2021
View product →
Energy Absorbing Twisted Rope Lanyard One Side PN112 and Other Side Hook PN121
Key Features Made up of Polyamide twisted rope of 12mm dia The spliced end is protected with a strong transparent covering sleeve, which not only protects the splicing but also makes the splicing visible for easy inspection before use Loops at the end are protected by an abrasion resistant thimble, which prevents the rope from being damaged by the metallic contact of the connector The rope also has a coloured tracer strand (age indicator) which loses its colour in due course of time, to show that the lanyards is now unfit for further use Available in length 1.0m, 1.5m, 1.8m, and 2.0m All KARAM lanyards are also supplied with any other hook on special request All lanyards with different combinations of connectors mentioned below are individually certified as per EN 355:2002 and IS 3521(part 2):2021 Certification: EN 355:2002 and IS 3521(Part 2):2021
View product →
Forked Lanyard with Energy Absorber - Kernmantle Rope
Key Features Forked lanyards come in twisted ropes, kernmantle ropes and in 44mm wide Polyester webbing. These lanyards offer the facility to move in all directions while remaining safely anchored at all times Certification: EN 355:2002 VG11 RfU CNB/P/11.063 (additional static strength test)IS 3521(Part 2):2021
View product →
Forked Lanyard with Energy Absorber - Tubular webbing
Key Features Forked lanyards come in twisted ropes, kernmantle ropes and in 44mm wide Polyester webbing. These lanyards offer the facility to move in all directions while remaining safely anchored at all times Certification: EN 355:2002 VG11 RfU CNB/P/11.062 VG11 RfU CNB/P/11.063 IS 3521(Part 2):2021 Description Provides fall protection: The primary purpose of a forked lanyard with an energy absorber is to provide fall protection for workers who are working at height. The energy absorber is designed to absorb the energy generated during a fall, reducing the risk of injury. Forked design for mobility: The forked design of the lanyard allows workers to move around more freely while still being safely connected to an anchor point. This is particularly useful in situations where workers need to move between different work areas or work in tight spaces. Anchor point attachment: The lanyard consists of two arms or legs, each with a snap hook at the end for attaching to an anchor point. The anchor point should be strong enough to support the weight of the worker and the force of a fall. Suitable for various industries: Forked lanyards with energy absorbers are widely used in construction, industrial, and maintenance settings where workers are at risk of falling from height. They are suitable for a range of tasks, including roofing, painting, and window cleaning. Regular inspection and maintenance: It is important to inspect and maintain the forked lanyard and energy absorber regularly to ensure that they are in good condition and functioning correctly. Any signs of damage or wear should be addressed promptly to maintain worker safety. do in one liner.
View product →
Forked Lanyard with Energy Absorber - Twisted Polyamide Rope
Key Features Forked lanyards come in twisted ropes, kernmantle ropes and in 44mm wide Polyester webbing. These lanyards offer the facility to move in all directions while remaining safely anchored at all times Certification: EN 355:2002 VG11 RfU CNB/P/11.063 (additional Static Strength Test)IS 3521(Part 2):2021
View product →
Forked Lanyard with Energy Absorber and PN136 Hooks
Key Features Forked lanyards come in twisted ropes, kernmantle ropes and in 44mm wide Polyester webbing. These lanyards offer the facility to move in all directions while remaining safely anchored at all times Certification: EN 355:2002 VG11 RfU CNB/P/11.063 (additional static strength test)IS 3521(Part 2):2021
View product →
Restraint Forked Lanyard
Key Features These lanyards allow users to move in all directions while maintaining a secure anchor point at all times. This feature provides flexibility and freedom of movement while ensuring safety These lanyards are designed exclusively for restraint purposes, which means they are meant to prevent the user from reaching a fall hazard Constructed from strong 11mm diameter Polyester webbing, ensuring robustness Certification: EN 354:2010 CNB/P/11.063
View product →
Restraint Webbing Lanyard (44mm) with One Side Karabiner PN112 and Other Side Hook PN121
Key Features Made up of 44mm wide Polyester webbing The loops at the ends are protected by an abrasion resistant covering. This prevents the webbing from being damaged by the metallic contact of the connector All KARAM lanyards are also supplied with any other hook on special request All lanyards with different combinations of connectors mentioned below are individually certified as per EN 354:2010 Certification: EN 354:2010
View product →
Restraint Webbing Lanyard (44mm) with One Side Karabiner PN112 and Other Side Hook PN131N
Key Features Made up of 44mm wide Polyester webbing The loops at the ends are protected by an abrasion resistant covering. This prevents the webbing from being damaged by the metallic contact of the connector All KARAM lanyards are also supplied with any other hook on special request All lanyards with different combinations of connectors mentioned below are individually certified as per EN 354:2010 Certification: EN 354:2010
View product →
Restraint Webbing Lanyard (44mm) with One Side Loop and Other Side Hook PN121
Key Features Made up of 44mm wide Polyester webbing The loops at the ends are protected by an abrasion resistant covering. This prevents the webbing from being damaged by the metallic contact of the connector All KARAM lanyards are also supplied with any other hook on special request All lanyards with different combinations of connectors mentioned below are individually certified as per EN 354:2010 Certification: EN 354:2010
View product →
Restraint Webbing Lanyard (44mm) with One Side Loop and Other Side Hook PN136
Key Features Made up of 44mm wide Polyester webbing The loops at the ends are protected by an abrasion resistant covering. This prevents the webbing from being damaged by the metallic contact of the connector All KARAM lanyards are also supplied with any other hook on special request All lanyards with different combinations of connectors mentioned below are individually certified as per EN 354:2010 Certification: EN 354:2010
View product →
Tools Lanyard - TL 01(N)
Accidents are also known to occur when tools fall from the hand of a worker who is using them while working at a height. KARAM offers Tools Lanyards with improvised elasticated webbing which can be connected to the belt of the Harness at one end and has a loop at the other end to hold a tool of weight of up to 10kg. Features:- Made of 20mm wide tubular webbing. Provided with a light-weight Karabiner for attachment to the user’s belt. Relaxed length : 85 cm Expanded length : 135 cm Convenient stretch-lanyard for tool holding.
View product →
Tools Lanyard - TL 02(N)
Accidents are also known to occur when tools fall from the hand of a worker who is using them while working at a height. KARAM offers Tools Lanyards with improvised elasticated webbing which can be connected to the belt of the Harness at one end and has a loop at the other end to hold a tool of weight of up to 10kg. Features:- Made of 20mm wide tubular webbing. Provided with a light-weight Karabiner for attachment to the user’s belt. Relaxed length : 85 cm Expanded length : 135 cm Convenient “Y’ leg stretch-lanyard for tool holding, allow the user to attach and carry 2 tools.
View product →
Work Positioning Lanyard with Grip Adjuster - Kernmantle Rope
Key Features Work positioning lanyards, which can be used by the worker to position himself at a height in a safe and supported manner, and work with both hands free. These lanyards can be connected to the lateral D-rings on the work positioning belts or combination harnesses and can be easily adjusted for their lengths to suit the application Certification: EN 358:2018
View product →
Work Positioning Lanyard with Grip Adjuster - Twisted Rope
Key Features Work positioning lanyards, which can be used by the worker to position himself at a height in a safe and supported manner, and work with both hands free. These lanyards can be connected to the lateral D-rings on the work positioning belts or combination harnesses and can be easily adjusted for their lengths to suit the application Certification: EN 358:2018
View product →
Work Positioning Lanyard with Ring type Adjuster
Key Features Work positioning lanyards, which can be used by the worker to position himself at a height in a safe and supported manner, and work with both hands free. These lanyards can be connected to the lateral D-rings on the work positioning belts or combination harnesses and can be easily adjusted for their lengths to suit the application Certification: EN 358:2018
View product →
Work Positioning Lanyards With Grip Adjuster
KARAM introduces a range of Work Positioning Lanyards that can be used by the worker to position himself at a height in a safe and supported manner, and work with both hands free. These Lanyards can be connected to the Lateral D-Rings on the Work Positioning Belts or combination Harnesses and can be easily adjusted for their lengths to suit the application. Rope is cross stitched and protected with a strong transparent covering sleeve, which not only protects the ends, but also makes the stitches visible for easy inspection prior to use. The loop at one end are protected by an abrasion resistant thimble, which prevents the rope from being damaged by the metallic contact of the connector. The rope also has a coloured tracer strand which loses its colour in due course of time, indicating that the Lanyard is now unfit for further use. Also available with protective covering sleeve (30cm) to protect the rope from abrasion when the Lanyard is used around a structure in the event of work-positioning. Material Made up of Kernmantle Rope of dia 11mm. Length Available in length 2m. Convenience Equipped with convenient Rope Grab adjuster for easy length adjustment. Attachments Steel Karabiner PN 112 at both the ends for attachment.
View product →
Work Positioning Lanyards With Grip Adjuster - 245(PR)
KARAM introduces a range of Work Positioning Lanyards that can be used by the worker to position himself at a height in a safe and supported manner, and work with both hands free. These Lanyards can be connected to the Lateral D-Rings on the Work Positioning Belts or combination Harnesses and can be easily adjusted for their lengths to suit the application. Rope is cross stitched and protected with a strong transparent covering sleeve, which not only protects the ends, but also makes the stitches visible for easy inspection prior to use. The loop at one end are protected by an abrasion resistant thimble, which prevents the rope from being damaged by the metallic contact of the connector. The rope also has a coloured tracer strand which loses its colour in due course of time, indicating that the Lanyard is now unfit for further use. Also available with protective covering sleeve (30cm) to protect the rope from abrasion when the Lanyard is used around a structure in the event of work-positioning. Material Made up of Kernmantle Rope of dia 11mm. Length Available in length 2m. Convenience Equipped with convenient Rope Grab adjuster for easy length adjustment. Attachments Steel Karabiner PN 112 at both the ends for attachment. Material:-Kernmantle Rope Attachments:-PN 112 Minimum Breaking Strength:- 15kN Dia of Rope11 mm Length:-2m Certified to:- EN 358:1999
View product →
Work Positioning Lanyards With Ring Adjuster
KARAM introduces a range of Work Positioning Lanyards that can be used by the worker to position himself at a height in a safe and supported manner, and work with both hands free. These Lanyards can be connected to the Lateral D-Rings on the Work Positioning Belts or combination Harnesses and can be easily adjusted for their lengths to suit the application. Rope is cross stitched and protected with a strong transparent covering sleeve, which not only protects the ends, but also makes the stitches visible for easy inspection prior to use. The loop at one end are protected by an abrasion resistant thimble, which prevents the rope from being damaged by the metallic contact of the connector. The rope also has a coloured tracer strand which loses its colour in due course of time, indicating that the Lanyard is now unfit for further use. Also available with protective covering sleeve (30cm) to protect the rope from abrasion when the Lanyard is used around a structure in the event of work-positioning. Material Made up of Kernmantle Rope of dia 11mm. Length Available in length 2m. Convenience Equipped with convenient manual ring type adjuster made of Forged Alloy Steel for easy length adjustment. Attachments Steel Karabiner PN 112 at both the ends for attachment. Material:-Kernmantle Rope Attachments:-PN 112 Minimum Breaking Strength:- 15kN Dia of Rope11 mm Length:-2m Certified to:- EN 358:1999
View product →