Catalogue

Rigging Hardware
Search & Enquire

Browse our full range of lifting, rigging and safety equipment. Search by name or product code, filter by category, and send an enquiry — no account or payment needed.

92 products in Rigging Hardware

← Back to categories
Crosby® Bolt Type Chain Shackles G-2150

Crosby® Bolt Type Chain Shackles G-2150

G-2150 Bolt Type Chain Shackle • Forged, Quenched & Tempered, will alloy pins. • Working Load Limit and Grade 6 permanently shown on every shackle. • Hot-dip galvanised. 85t shackles have hot-dip galvanised bows and the bolts are Dimetcoted and painted red. • Sizes 3/8 inch and below are mechanically galvanised. • Fatigue rated at 20,000 cycles at 1.5 times the Working Load Limit. • Approved for use at -40°C (-40° F) to 204°C (400° F). • Meets or exceeds all requirements of ASME B30.26 • Sizes ½t - 25t meet the performance requirements of EN13889:2003. • Shackles 55t and smaller can be furnished proof tested with certificated to designated standards. • Shackles can meet Charpy impact testing of 42 joules min. ave. at -20°C (-4°F), upon special request. • Look for the Red Pin® ...the mark of the genuine Crosby quality.

View product →
Crosby® Bolt Type Shackle G-2130

Crosby® Bolt Type Shackle G-2130

G-2130 Bolt Type Anchor Shackle • Working Load Limit and Grade 6 permanently shown on every shackle. • Forged, Quenched & Tempered, will alloy pins. • Hot-dip galvanised. 85t, 120t and 150t shackles are all hot dip galvanised bows and the bolts are Dimetcoted and painted red. • Sizes 3/8 inch and below are mechanically galvanised. • Fatigue rated at 20,000 cycles at 1.5 times the Working Load Limit. • Approved for use at -40°C (-40° F) to 204°C (400° F) • Meets or exceeds all requirements of ASME B30.26 • Shackles 85tins and larger are individually proof tested to 2.0 times the working load limit. • Type Approval certification in accordance with ABS 2016 Steel Vessel Rules and ABS Guide for Certification of Lifting appliances available, on special request and may incur additional costs. • 3.1 Certification as standard available for Charpy and statistical proof test from 3.25t up to 25t to DNV2.7-1 and EN13889 i • Shackles can meet charpy requirements of 42 joules min. ave. at -20°C (-4°F), upon special request. • Meet the performance requirements of Federal Specification RR-C-271H, Type IVA, Grade A, Class 3. • Look for the Red Pin® ...the mark of the genuine Crosby quality

View product →
Crosby® Easy-Loc Wide Body Shackle G-2160E

Crosby® Easy-Loc Wide Body Shackle G-2160E

G-2160E Wide Body Shackle • Increase in shackle now radius provides minimum 58% gain in sling bearing surface and eliminates need for a thimble. • Increases useable sling strength a minimum of 115% and improves life of wire rope slings. • Can be used to connect synthetic web slings, synthetic round slings or wire rope slings. • All sizes Quenched and Tempered for maximum strength • Forged alloy steel from 75 through 300 metric tons • Proof tested as follows: o 75 metric tons and 200 through 300 metric tons: 2 x Working Load Limit o 125 metric tons : 1.6 x Working Load Limit • All ratings are in metric tons, embossed on side of bow • G-2160E, (75t and larger), bows are furnished Dimetcoted, Pins are Dimetcoted, then painted red. • Approved for use at -40°C (-40° F) to 204°C (400° F) • Bow and bolt are certified to meet Charpy impact testing of 42 joules min. ave. at -20°C (-4°F) • All 2160E shackles are individually proof tested and magnetic particle inspected. • Type approved and certification to DNV Rules for Certification of Lifting Appliances, and are produced in accordance with DNV MSA requirements. o Serialization/Identification o Material Testing (Physical/Chemical/Charpy) o Proof Testing • Look for the Red Pin® ...the mark of the genuine Crosby quality.

View product →
Crosby® Extra Heavy Wire Rope Thimbles - G-414

Crosby® Extra Heavy Wire Rope Thimbles - G-414

CROSBY EXTRA HEAVY WIRE ROPE THIMBLES • Available in Hot Dip galvanized or Stainless Steel (Type 304). • Meets the performance requirements of EN13411-1:2002. • Stainless steel recommended for more corrosive environments where greater protection is required. • Greater protection against wear and deformation of the wire rope eye. • Longer service life.

View product →
Crosby® Forged Eye Nuts - G-400

Crosby® Forged Eye Nuts - G-400

CROSBY G-400 EYE NUTS • Forged Steel - Quenched & Tempered • Hot Dip Galvanised. • Tapped with standard UNC Class 2 threads after galvanising. • Also available in blank (as forged) item. • Meets or exceeds all requirements of ASME B30.26. • 5:1 Design factor • Working Load Limits shown are for in-line pull. Rating based on standard tap size.

View product →
Crosby® Forged Steel Wire Rope Clips- G-450 (Red-U-Bolt Clip)

Crosby® Forged Steel Wire Rope Clips- G-450 (Red-U-Bolt Clip)

CROSBY FORGED STEEL WIRE ROPE CLIPS – G450 • Each base has a Product Identification Code (PIC) for material traceability, the name CROSBY or CG, and a size forged into it. • Based on the catalogue breaking strength of wire rope, Crosby wire rope clips have an efficiency rating of 80% for 3mm through 22mm sizes, and 90% for sizes 24mm through 90mm. • Entire Clip is galvanized to resist corrosive and rusting action • Size 3mm through 62mm and 75mm have forged bases • All Clips are individually bagged with proper application instructions and warning information. • Clip sizes up through 38mm have rolled threads. • Meets or exceeds all requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements. Importantly, these wire rope clips meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26 • Look for the Red-U-Bolt®, your assurance of Genuine Crosby Clips Crosby Clips, all sizes except 68-72mm and 85-90mm meet the performance requirements of EN13411:2003. Crosby Clips, all sizes 6mm and larger, meet the performance requirements of Federal Specification FF-C-450 TYPE 1 CLASS 1, except for those provisions required of the contractor.

View product →
Crosby® Platinum Line - A-1328 Eye Grab Hook

Crosby® Platinum Line - A-1328 Eye Grab Hook

Crosby A-1328 Grade 100 Eye Grab Hook • Forged Alloy Steel – Quenched and Tempered. • Individually proof tested at 2.5 times Working Load Limit, with certification. • Each hook has a Product Identification Code for material traceability along with the size and the name Crosby. • Suitable for use with Grade 100 and Grade 80 chain. • Fatigue rated to 20,000 cycles at 1.5 times the Working Load Limit.

View product →
Crosby® Platinum Line - A-1329 Eye Foundry Hook

Crosby® Platinum Line - A-1329 Eye Foundry Hook

Crosby A-1329 Eye Foundry Hook • Forged Alloy steel, Quenched and Tempered • Individually proof tested at 2.5 times Working Load Limit, with certification. • Each hook has a Product Identification Code for material traceability along with the size and the name Crosby. • Suitable for use with Grade 100 and Grade 80 chain. • Fatigue rated to 20,000 cycles at 1.5 times the Working Load Limit. • Hook can be tip loaded at the reduced working load limit, see below. • Operator must ensure that the load is retained properly in the hook.

View product →
Crosby® Platinum Line - A-1337 LOK-A-LOY 10 Alloy Connecting Link

Crosby® Platinum Line - A-1337 LOK-A-LOY 10 Alloy Connecting Link

Crosby Lok-A-Loy® A-1337 Alloy Connecting Link • Suitable for use with Grade 100 and Grade 80 chain. • Individually proof tested at 2.5 times Working Load Limit, with certification. • Locking system that provides for simple assemble and disassembly – no special tools needed. • Meets ASTM A-952 standards for Grade 100 chain fittings. • Forged Alloy Steel – Quenched and Tempered. • Sizes 9/32 through 1 inch are fatigue rated.

View product →
Crosby® Platinum Line - A-1338 Clevis Cradle Grab Hook

Crosby® Platinum Line - A-1338 Clevis Cradle Grab Hook

Crosby A-1338 Grade 100 Clevis Cradle Grab Hook • Forged Alloy Steel – Quenched and Tempered. • Innovative Cradle design allows for 100% efficiency of Grade 100 chain • Individually proof tested at 2.5 times Working Load Limit, with certification. • Each hook has a Product Identification Code for material traceability along with the size and the name Crosby. • Suitable for use with Grade 100 and Grade 80 chain. • The use of the A-1338 Cradle Grab Hook will allow 100% of the chain sling capacity. When used to hook back to chain leg to form a chocker, the angle of the choke must be 120 degrees or greater. When used as a chain shortener, minimise twist of chain and ensure chain is fully engaged in hook. • Fatigue rated to 20,000 cycles at 1.5 times the Working Load Limit.

View product →
Crosby® Platinum Line - A-1343 Welded Master Link

Crosby® Platinum Line - A-1343 Welded Master Link

Grade 100 A-1343 Welded Master Link • Alloy Steel – Quenched and Tempered. Individually proof tested to values shown below, with certification. • Design Factor of 5 to 1. • Proof Tested with 70% inside width special fixtures sized to prevent localised point loading per EN1677-4. • Each main link is marked with Product Identification Code (PIC) for material traceability, Grade, CE, Chain size and the “CG” (Crosby Group). • A-1343 master links are type approved to DNV Certification. • Engineered Flat for use with S-1325A coupler link • Fatigue rated to 20,000 cycles at 1.5 times the Working Load Limit. • Meets or exceeds all requirements of ASME B30.26

View product →
Crosby® Platinum Line - A-1346 Welded Master Link Assembly

Crosby® Platinum Line - A-1346 Welded Master Link Assembly

Grade 100 A-1346 Welded Master Link Assembly • Alloy Steel – Quenched and Tempered. Individually proof tested to values shown below, with certification. • Design Factor of 5 to 1. • Proof Tested with 70% inside width special fixtures sized to prevent localised point loading per EN1677-4. • Each main link is marked with Product Identification Code (PIC) for material traceability, Grade, CE, Chain size and the “CG” (Crosby Group). • A-1346 master links are type approved to DNV Certification. • Engineered Flat for use with S-1325A coupler link. • Fatigue rated to 20,000 cycles at 1.5 times the Working Load Limit. • Meets or exceeds all requirements of ASME B30.26

View product →
Crosby® Platinum Line - A-1348 Eye Cradle Grab Hook

Crosby® Platinum Line - A-1348 Eye Cradle Grab Hook

Crosby A-1348 Grade 100 Eye Cradle Grab Hook • Forged Alloy Steel – Quenched and Tempered. • The use of the A-1348 Cradle Grab Hook will allow 100% of the chain sling capacity. When used to hook back to chain leg to form a chocker, the angle of the choke must be 120 degrees or greater. When used as a chain shortener, minimise twist of chain and ensure chain is fully engaged in hook. • Innovative cradle design allows for 100% efficiency of Grade 100 chain. • Individually proof tested at 2.5 times Working Load Limit, with certification. • Each hook has a Product Identification Code for material traceability along with the size and the name Crosby. • Suitable for use with Grade 100 and Grade 80 chain. • Fatigue rated to 20,000 cycles at 1.5 times the Working Load Limit.

View product →
Crosby® Platinum Line - A-1355 Chain Choker Hook

Crosby® Platinum Line - A-1355 Chain Choker Hook

Crosby A-1355 Chain Choker Hook • Forged Alloy steel, Quenched and Tempered • Individually proof tested, with certification. • Each hook has a Product Identification Code for material traceability along with the size and the name Crosby. • Rated for Grade 100 chain in choker applications. • Fatigue rated to 20,000 cycles at 1.5 times the Working Load Limit. • For use with S-1325 Chain Coupler Link

View product →
Crosby® Platinum Line - A-1358 Clevis Grab Hook

Crosby® Platinum Line - A-1358 Clevis Grab Hook

Crosby A-1358 Grade 100 Clevis Grab Hook • Forged Alloy Steel – Quenched and Tempered. • Individually proof tested at 2.5 times Working Load Limit, with certification. • Each hook has a Product Identification Code for material traceability along with the size and the name Crosby. • Suitable for use with Grade 100 and Grade 80 chain. • Fatigue rated to 20,000 cycles at 1.5 times the Working Load Limit.

View product →
Crosby® Platinum Line - A-1359 Clevis Foundry Hook

Crosby® Platinum Line - A-1359 Clevis Foundry Hook

Crosby A-1359 Clevis Foundry Hook • Forged Alloy steel, Quenched and Tempered • Individually proof tested at 2.5 times Working Load Limit, with certification. • Each hook has a Product Identification Code for material traceability along with the size and the name Crosby. • Suitable for use with Grade 100 and Grade 80 chain. • Fatigue rated to 20,000 cycles at 1.5 times the Working Load Limit. • Hook can be tip loaded at the reduced working load limit, see below. • Operator must ensure that the load is retained properly in the hook.

View product →
Crosby® Platinum Line - A-1370 Reeving Link

Crosby® Platinum Line - A-1370 Reeving Link

Crosby A-1370 Reeving Link • Forged Alloy steel, Quenched and Tempered • Individually proof tested to 2.5 times Working Load Limit, with certification. • Each hook has a Product Identification Code for material traceability along with the size and the name Crosby in raised letters. • For use with S-1325 Chain Coupler Link • Suitable for use with Grade 100 and Grade 80 chain.

View product →
Crosby® Platinum Line - A-344 Welded Master Link

Crosby® Platinum Line - A-344 Welded Master Link

Crosby A-344 Master Links • Alloy steel, Quenched and Tempered • Individually proof tested to 2.5 times Working Load Limit, with certification. • Design Factor 5:1 • Proof Tested with 70% inside width special fixtures sized to prevent localised point loading per EN1677. • Each link has a Product Identification Code for material traceability along, Grade, CE, chain size and the “CG” (Crosby Group). • A-344 master links are type approved to DNV Certification Notes 2.7-1 – Offshore Containers. These Crosby master links are 100% proof tested. Every batch is impact tested. The tests are conducted by Crosby. • Engineered flat for use with S-1325 Chain Coupler Link. • Fatigue rated to 20,000 cycles at 1.5 times the Working Load Limit. • Meets or exceeds all requirements for ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements. Importantly, these links meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26. • Available only in EMEA.

View product →
Crosby® Platinum Line - A-347 Welded Master Link Assembly

Crosby® Platinum Line - A-347 Welded Master Link Assembly

Crosby A-347 Welded Master Link Assembly • Alloy steel, Quenched and Tempered • Individually proof tested to 2.5 times Working Load Limit, with certification. • Design Factor 5:1 • Proof Tested with 70% inside width special fixtures sized to prevent localised point loading per EN1677. • Each main link has a Product Identification Code for material traceability, Grade, CE, chain size and the “CG” (Crosby Group). Each sublink is marked with a traceability code. • A-347 master links are type approved to DNV Certification Notes 2.7-1 – Offshore Containers. These Crosby master links are 100% proof tested. Every batch is impact tested. The tests are conducted by Crosby. • Engineered flat for use with S-1325A Chain Coupler Link. • Fatigue rated to 20,000 cycles at 1.5 times the Working Load Limit. • Meets or exceeds all requirements for ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements. Importantly, these links meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26. • Available only in EMEA.

View product →
Crosby® Platinum Line - Grade 100 Alloy Chain

Crosby® Platinum Line - Grade 100 Alloy Chain

Crosby® Grade 100 Alloy Chain • Alloy Steel. • Heat Treated. • 25% stronger than Grade 80 Alloy Chain. • Permanently embossed with CG (Crosby Group) and 10 (Grade). • Finish - Black rust preventative coating. • Meets EN 818-2 (WLL +25%) for Grade 10 chain • Proof Tested at 2.5 times the Working Load Limit with certification.

View product →
Crosby® Platinum Line - Grade 80 Alloy Chain

Crosby® Platinum Line - Grade 80 Alloy Chain

Crosby® Grade 80 Alloy Chain •Alloy Steel. • Heat Treated. • Finish – Black rust preventative coating. • Permanently embossed with CG (Crosby Group) and 8 (Grade). • Proof Tested at 2.5 times the Working Load Limit with certification

View product →
Crosby® Platinum Line - L-1327 Eye Sling Hook

Crosby® Platinum Line - L-1327 Eye Sling Hook

Crosby L-1327 Grade 100 Eye Sling Hook • For use with wire rope. Suitable for use with Grade 100 and Grade 80 chain. Working load limit need to be de-rated to achieve a 5:1 design factor. • Forged Alloy, Quenched and Tempered • Each hook has a Product Identification Code for material traceability along with the size and the name Crosby. • 25% Stronger than Grade 80. • Eye Sling hooks incorporate QUIC-CHECK® deformation and angle indicators. • When secured with the proper cotter pin through the hole in the tip of the hook meets the intent of OSHA Rule 1926.1431(g) and 1926.1501(g) for personnel lifting. • Individually proof tested at 2.5 times Working Load Limit, with certification. • Fatigue rated to 20,000 cycles at 1.5 times the Working Load Limit.

View product →
Crosby® Platinum Line - L-1338 Clevis Cradle Grab Hook with Latch

Crosby® Platinum Line - L-1338 Clevis Cradle Grab Hook with Latch

Crosby L-1338 Grade 100 Clevis Cradle Grab Hook • Forged Alloy Steel – Quenched and Tempered. • Innovative Cradle design allows for 100% efficiency of Grade 100 chain • Individually proof tested at 2.5 times Working Load Limit, with certification. • Each hook has a Product Identification Code for material traceability along with the size and the name Crosby. • Suitable for use with Grade 100 and Grade 80 chain. • Fatigue rated to 20,000 cycles at 1.5 times the Working Load Limit.

View product →
Crosby® Platinum Line - L-1339 Clevis Sling Hook

Crosby® Platinum Line - L-1339 Clevis Sling Hook

Crosby L-1339 Clevis Sling Hook • Forged Alloy Steel – Quenched and Tempered. • Individually proof tested at 2.5 times Working Load Limit, with certification. • Each hook has a Product Identification Code for material traceability along with the size and the name Crosby. • Hoist hooks incorporate QUIC-CHECK® deformation and angle indicators. • Low profile hook tip. • New integrated latch (S-4320/S-4339) meets the world standard for lifting o Heavy Duty stamped latch interlocks with the hook tip. o High cycle, long life spring o When secured with the proper cotter pin through the hole in the tip of the hook meets the intent of OSHA Rule 1926.1431(g) and 1926.1501(g) for personnel lifting. • Suitable for use with Grade 100 and Grade 80 chain. • Fatigue rated to 20,000 cycles at 1.5 times the Working Load Limit.

View product →
Page 1 of 4